Brother International MFC-J6920DW Wi-Fi Direct Guide - Page 21
Glossary
View all Brother International MFC-J6920DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
4 Glossary 4 Wi-Fi Direct™ network terms 4 Group Owner (G/O) 4 If you set Group Owner to On, your Brother machine serves as an access point when you configure a Wi-Fi Direct™ network. The G/O assigns an SSID name, password and IP address for the Wi-Fi Direct™ network. The default setting is Off. 4 Device Information 4 Device Name 4 You can check the Brother machine's device name in the Wi-Fi Direct™ network environment. The device name will be shown as MFC-XXXX or DCP-XXXX (where XXXX is your model name). SSID 4 This field displays the current Wi-Fi Direct™ network SSID name. The display shows up to 32 characters of the SSID name. IP Address 4 This field displays the current IP address of the machine, as assigned by the G/O. Status Information 4 Status 4 This field displays the current Wi-Fi Direct™ network status. When your machine is a G/O, it displays the message G/O Active(**) (where ** is the number of connected clients). When your machine is a client, the machine displays the message Client Active. If the machine displays Off, your machine's Wi-Fi Direct™ interface is disabled. Signal 4 This field displays the current Wi-Fi Direct™ network signal strength. Channel 4 This field displays the current Wi-Fi Direct™ network channel. Speed 4 This field displays the current Wi-Fi Direct™ network speed. I/F Enable 4 If you want to use the Wi-Fi Direct™ network connection, set I/F Enable to On. 18