Brother International MFC-J6920DW Wi-Fi Direct Guide - Page 19
I see error messages when configuring Wi-Fi Direct™ from the control panel menu. continued
View all Brother International MFC-J6920DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Troubleshooting I see error messages when configuring Wi-Fi Direct™ from the control panel menu. (continued) Error Message Cause Action (For MFCJ6920DW/J6925DW) The Brother machine cannot find your mobile device. Make sure your machine and mobile device are in the Wi-Fi Direct™ mode. No Device (For MFCJ3520/J3720/J6520DW /J6720DW) No Device Move the mobile device closer to your Brother machine. 3 Move your Brother machine and the mobile device to an obstruction-free area. If you are manually configuring the Wi-Fi Direct™ network, make sure you have entered the correct password. If your mobile device has a configuration page for how to obtain an IP address, make sure the IP address of your mobile device has been configured via DHCP. (For MFCJ6920DW/J6925DW) A device is already connected. Press [OK]. (For MFCJ3520/J3720/J6520DW /J6720DW) Another mobile device is already connected to the Wi-Fi Direct™ network where the Brother machine is the G/O. After the current connection between your Brother machine and another mobile device has shut down, try to configure the Wi-Fi Direct™ settings again. Confirm the connection status by printing the Network Configuration Report (see Software and Network User's Guide). A device is already connected. Press [OK]. 16