Brother International PE-DESIGN 10 Instruction Manual - Page 263
Saving the edited fill, stamp stitch pattern, Region engrave], Tools], Region emboss], Save As]
View all Brother International PE-DESIGN 10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 263 highlights
Creating Fill/Stamp Stitch Pattern 2 Click [Region (engrave)] in the [Tools] group, and then click the first and fourth wave regions. b To remove the embossing/engraving effect, use the [Region (reset)] tool. Click [Region (reset)] in the [Tools] group, and then click a region with an effect applied. Programmable Stitch Creator These regions appear in red and will be sewn with short stitches to give the effect of engraving. Step 4 Saving the edited fill/ stamp stitch pattern Fill/stamp stitch patterns are saved in the .pas format. 1 Click , and then select [Save As] from the command list. 3 Click [Region (emboss)] in the [Tools] group, and then click the second and fifth wave regions. 2 Select the drive and the folder, and then type in the file name. This region appears in blue and will be sewn with no dropped stitches to give the effect of embossing. When saving a fill/stamp pattern, specify the size beside [Default Size]. Click [mm] or [inch] to select the measurement units. 3 Click [Save]. 262