Brother International PE770 Users Manual - English - Page 28
Pass the thread under the hook on the thread - bobbins
UPC - 012502623489
View all Brother International PE770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
GETTING READY While holding the thread near the spool with h your right hand, as shown, pull the thread with your left hand, and then pass the thread behind the thread guide cover and to the front. 1 Pass the thread under the hook on the thread j guide, and then wind it counterclockwise under the pretension disk. 1 1 a Thread guide cover Pass the thread under the thread guide plate, i and then pull it to the right. 1 a Thread guide plate a Thread guide Note z Make sure that the thread passes under the pretension disk. While holding the thread with your left hand, k wind the thread that was pulled out clockwise around the bobbin five or six times with your right hand. Note z Make sure that the thread between the spool and the bobbin is pulled tight. z Be sure to wind the thread clockwise around the bobbin, otherwise the thread will become wrapped around the bobbin winder shaft. 26