Brother International PR-650 PE-DESIGN NEXT CW Instruction Manual PRCW1 - Page 11
Leave, uncut s, Color, Cutting, Sewing, Order, b
View all Brother International PR-650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
1 Leave uncut sections (Default: OFF) Select whether or not sections of the cutting line are to be left uncut. This prevents the fabric from moving out of place during cutting. a Note: • If the cutting lines were set to "Leave uncut sections", cut them with scissors after the cutting step is finished. • When making a cutting line for an appliqué piece, be sure to select "Leave uncut sections". 2 Use Cutting only The cut edges will be cleanly finished. Select this setting for patterns where the cut edges will be left exposed, for example, with patches. Cutting for Only 2 cutwork needles are covering used to cut edges. Cutting edge of fabric speed is given priority over the finish of the cut edges when embroidering complicated pattern with cutting line from several angles. Select this setting if the cut edges will be covered with satin stitching. 3 Hint view This shows a preview of the cutting lines with the settings selected in 1 and 2 applied. By moving the pointer over each setting, a preview of the setting can be displayed. 4 Click to display or hide the hint view (3). Creating Cutting Lines b Memo: The "Color" pane is not available in the following situations. • When "Cutting" has been selected for the pattern selected in the Design Page. • When "Cutting" has been selected for the frame selected in the "Sewing Order" pane. 9