Brother International S-7200B Service Manual - Page 21
<When set to condense>, <When set to chain stitch thread trimming thread wiping>
View all Brother International S-7200B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
3. FUNCTION SETTINGS (OPERATION PANEL) ・ Start backtacking or end backtacking must be set. ・ For the sewing start, set stitch number B to "0". Output will occur while stitches for stitch number A are being sewn. ・ For the sewing end, set stitch number C to "0". Output will occur while stitches for stitch number D are being sewn. Stop Motor Needle up signal Operation Option Stitch number A Stitch number D ・ After thread trimming, the thread wiper signal is output. ・ Use Function No. 109 and No. 110 to set the timer operation. Motor 2254M Option Needle up stop ・ After thread trimming, output is synchronized with the automatic presser foot lifter. ・ Use Function No. 111 and No. 112 to set the timer operation. ・ When the presser foot is lowered, option output turns off. Needle up stop Motor Presser foot lifting Option 2255M 2256M S-7200B 14