Brother International VX-807 Users Manual - English - Page 25
Button, Sewing
View all Brother International VX-807 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Button Sewing STITCH LENGTH STITCH WIDTH NEEDLE POSITION PRESSER FOOT NEEDLE PRESSURE ADJUSTER : 0 : According to the distance of holes : L or R : Zigzag : Single : Middle 1. Place button between the presser foot and material. 2. Control zigzag width to suit the distance of the holes of button. 3. Lower the presser foot and check if the needle enters into both holes of button without any obstruction. 4. Slowly sew about 10 stitches. 5. Stop machine and raise needle from the material. 6. Remove from machine. Cut upper and lower threads and with normal sewing needle, sew threads through to back of button and tie. Kit BUTTON FITTING WITH THREAD SHANK You will often need the thread shank of button for heavier materials. 1. Place a needle on the button as illust• rated and sew as regular method of button fitting. 2. After about 10 stitches, remove the fabric from the machine, leaving upper thread little longer in order to form a thread shank. 3. Pull upper thread between the button and the material through the hole of button and upper thread tightly around the stitches. 4. Fasten the thread ends. - 23 -