Brother International VX-807 Users Manual - English - Page 9
Presser
View all Brother International VX-807 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
L.1..] L IPA R • •• Presser Foot Loosen rt tV Tighten NEEDLE POSITION SELECTOR By shifting this lever to L (left), M (middle) or R (right), you will be able to sew straight and zigzag stitches as the base line. When you sew close to the edge of material, select L or R so that you can obtain better feeding of the material. For almost all stitching, this selector to be set at M (middle) but set other position for following application, 1. Buttonhole (page 21) 2. Button sewing (page 23) 3. Decorative stitches (page 20) NOTE: 1. Do not move the selector while needle is in the material. 2. Set the selector always at M when you use twin needle. You will find various kinds of presser foot for special use in the extension table. According to your sewing needs, it may be necessary to change presser foot. CHANGING THE PRESSER FOOT 1. Raise needle to its highest position and raise presser foot Iifter. 2. Loosen presser foot thumb screw and remove presser foot. 3. Place grooved side of the new presser foot against the flat of the presser bar. 4. Tighten thumb screw securely. -7 -