Brother International VX-807 Users Manual - English - Page 8
Various, Control
View all Brother International VX-807 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Various Control 314 I Stitch length/ Reverse sewing knob 0 I • 3 • STITCH LENGTH/REVERSE SEWING KNOB STITCH LENGTH KNOB The stitch length is regulated by turning this knob. Numbers on the ring represent the stitch length. THE HIGHER THE NUMBER, THE LONGER THE STITCH. The "0" means that material is not fed. REVERSE SEWING KNOB To sew in reverse, push this knob as far as it will go and keep it in this position until you wish to sew forward. When you release, it springs back for forward sewing. Reverse sewing is used for back tacking and reinforcement of the seam. Win 0 12 34 5 Stitch width knob STITCH WIDTH KNOB The zigzag width is regulated by operating the stitch knob. %Numbers above the knob represent the width of stitch. THE HIGHER THE NUMBER, THE WIDER THE STITCH. The "0" means straight stitch only. NOTE: 1. Do not move the knob while the needle is in the material. 2. When using twin needle, knob should always be set at under .,3., -6-