Brother International VX-807 Users Manual - English - Page 26
Making, Various, Stitches
View all Brother International VX-807 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
6 Making Various Stitches Zipper Insertion Thumb screw Zipper foot is used to sew various types of zippers and can easily be positioned to right or left side of needle. When zipper is being sewn at right side of needle, position zipper foot by loosening thumb screw and sliding zipper foot to the left. When zipper is being sewn at left side of needle, position zipper foot by loosening thumb screw and slide zipper foot to the right. STITCH LENGTH SITTCH WIDTH NEEDLE POSITION PRESSER FOOT NEEDLE PRESSURE ADJUSTER Needle Gathering STITCH LENGTH STITCH WIDTH NEEDLE POSITION PRESSER FOOT NEEDLE PRESSURE ADJUSTER 2- 3 0 M Zipper Foot Single According to the material 1. Lower needle into side notch located on presser foot (right or left). 2. Tighten thumb screw to lock presser foot into position. 3. Fold edge of material 3/4 inch (2 cm) and place zipper under folded portion. 4. By guiding zipper foot along the zipper teach, you will stitch close to edge of zipper in correct position. 5. To sew opposite side of zipper, loosen thumb screw and position zipper foot (right or left). 4 0 M Straight Single According to the material 1. Loosen upper thread tension (set dial at about '2') so that lower thread lies on the underside of material. 2. Sew a single row or multiple rows of straight stitching. 3. Pull lower thread(s) to gather up material. - 24 -