Canon 2689B001 DC330 Instruction Manual - Page 20

Preparing the Wireless Controller and Accessories, IMPORTANT, NOTES

Page 20 highlights

ONCE THE BATTERY PACK IS FULLY CHARGED 1 Disconnect the compact power adapter from the camcorder. 2 Unplug the power cord from the power outlet and the compact power adapter. TO REMOVE THE BATTERY PACK Press BATT. to release the battery pack. Slide the battery pack down and then pull it out. IMPORTANT • Turn off the camcorder before connecting or disconnecting the compact power adapter. After you turn the switch to , important file allocation data is updated on the disc. Be sure to wait until the PLAY and CAMERA mode indicators are completely off. • You may hear some noise from the compact power adapter during use. This is not a malfunction. • We recommend charging the battery pack in temperatures between 10 °C and 30 °C (50 °F and 86 °F). Outside the temperature range of 0 °C to 40 °C (32 °F to 104 °F), the charging will not start. • Do not connect to the camcorder's DC IN terminal or to the compact power adapter any electrical equipment that is not expressly recommended for use with this camcorder. • To prevent equipment breakdowns and excessive heating, do not connect the supplied compact power adapter to voltage converters for overseas travels or special power sources such as those on aircraft and ships, DC-AC inverters, etc. NOTES • The CHARGE indicator also serves as a rough estimate of the charge status. Continuously on: Battery pack fully charged. Two quick flashes at 1-second intervals: Battery pack at least 50% charged. If the indicator flashes quickly but not exactly in this pattern, refer to Troubleshooting ( 79). One flash at 1-second intervals: Battery pack less than 50% charged. • We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might need. • U.S.A. and Canada only: The Lithium ion/polymer battery that powers the product is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery. Preparing the Wireless Controller and Accessories Using the Wireless Controller First, insert the supplied lithium button battery CR2025 into the wireless controller. Tab 1 Press the tab in the direction of the arrow and pull out the battery holder. 20 • Preparations

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103

20 •
Preparations
1
Disconnect the compact power
adapter from the camcorder.
2
Unplug the power cord from the
power outlet and the compact
power adapter.
Press
to release the battery
pack. Slide the battery pack down
and then pull it out.
IMPORTANT
Turn off the camcorder before
connecting or disconnecting the
compact power adapter. After you turn
the
switch to
, important file
allocation data is updated on the disc.
Be sure to wait until the PLAY and
CAMERA mode indicators are
completely off.
You may hear some noise from the
compact power adapter during use. This
is not a malfunction.
We recommend charging the battery
pack in temperatures between 10 °C and
30 °C (50 °F and 86 °F). Outside the
temperature range of 0 °C to 40 °C
(32 °F to 104 °F), the charging will not
start.
Do not connect to the camcorder’s DC
IN terminal or to the compact power
adapter any electrical equipment that is
not expressly recommended for use with
this camcorder.
To prevent equipment breakdowns and
excessive heating, do not connect the
supplied compact power adapter to
voltage converters for overseas travels or
special power sources such as those on
aircraft and ships, DC-AC inverters, etc.
NOTES
The CHARGE indicator also serves as a
rough estimate of the charge status.
Continuously on
: Battery pack fully
charged.
Two quick flashes at 1-second intervals
:
Battery pack at least 50% charged. If the
indicator flashes quickly but not exactly
in this pattern, refer to
Troubleshooting
(
79).
One flash at 1-second intervals
: Battery
pack less than 50% charged.
We recommend that you prepare battery
packs to last 2 to 3 times longer than you
think you might need.
U.S.A. and Canada only:
The
Lithium ion/polymer battery
that powers the product is
recyclable. Please call
1-800-8-BATTERY for
information on how to recycle
this battery.
Preparing the Wireless Controller and
Accessories
Using the Wireless Controller
First, insert the supplied lithium button
battery CR2025 into the wireless
controller.
1
Press the tab in the direction of the
arrow and pull out the battery
holder.
O
NCE
THE
BATTERY
PACK
IS
FULLY
CHARGED
T
O
REMOVE
THE
BATTERY
PACK
BATT.
Tab