Canon 2689B001 DC330 Instruction Manual - Page 84

REACHED THE MAXIMUM NUMBER OF SCENES - The maximum number of scenes has been reached. Delete some recordings (DVD-RW in VR mode) to free some space ( 37) or replace the disc. RECOVERING DATA PLEASE WAIT... - Data on the disc is being recovered. Wait until this message disappears before resuming use. TASK IN PROGRESS DO NOT DISCONNECT THE POWER SOURCE - The camcorder is updating important file allocation data on the disc. Do not disconnect the compact power adapter or remove the battery pack. • TEMPERATURE TOO HIGH CANNOT RECORD • TEMPERATURE TOO HIGH CANNOT REMOVE DISC - The camcorder has exceeded its operational temperature. Disconnect the compact power adapter and remove the battery and let the camcorder cool down before resuming use. TOO MANY STILL IMAGES DISCONNECT USB CABLE Disconnect the USB cable and decrease the number of still images on the memory card to less than 1,800. If a dialog appeared on the computer screen, close it and then restore the connection. TRANSFER ORDER ERROR You attempted to set more than 998 transfer orders ( 70). UNABLE TO RECOGNIZE THE DATA - The disc may not be recognized by this camcorder if it was initialized with a different device. - You inserted a disc recorded in a different Television System (PAL or SECAM). UNABLE TO RECOVER DATA - Could not recover a corrupted file. - This message can also appear if condensation has formed. If you suspect condensation is the reason, do not initialize the disc and wait until the camcorder dries completely before resuming use ( 90). UNFINALIZE THE DISC - You cannot record additional scenes on a finalized DVD-RW in VIDEO mode. Unfinalize the disc first ( 50). USE OF A RECOMMENDED DISC IS ADVISED - The disc can be used but performance is not guaranteed. We recommend that you use a disc that has been tested ( 6). Direct Print Related Messages About Canon PIXMA/SELPHY DS Printers: If the printer's error indicator flashes or an error message appears on the printer's operation panel, refer to the printer's instruction manual. CANNOT PRINT! - You attempted to print an image that was recorded with another camcorder, with a different compression, or was edited on a computer. COMMUNICATION ERROR - The printer is experiencing a data transfer error. Cancel printing. Disconnect the USB cable and turn off the camcorder and the printer. After a short while, turn them on again, set the camcorder to mode and restore the connection. If you attempted to print from a memory card that contains a large number of images, reduce the number of images. COULD NOT PRINT X IMAGES - You attempted to use the print order settings to print X images that were recorded with another camcorder, with a different compression or were edited on a computer. FILE ERROR - You attempted to print an image that was recorded with another camcorder, 84 • Additional Information