Canon 2689B001 DC330 Instruction Manual - Page 83

• CANNOT RECORD • CANNOT RECORD CHECK THE DISC - There is a problem with the disc. Replace the disc ( 27). - This message can also appear if condensation has formed. Wait until the camcorder dries completely before resuming use ( 90). - The disc's recording surface may be dirty or scratched. - This message may appear when the camcorder is repeatedly subject to vibration. CANNOT USE DISC USE OF A RECOMMENDED DISC IS ADVISED - The disc cannot be used. We recommend that you use a disc that has been tested ( 6). CARD ERROR - A memory card error occurred. The camcorder cannot record or display the image. The error may be temporary. If the message disappears after 4 seconds and appears in red, turn the camcorder off, remove the card and reinsert the card. If changes to green, you can resume recording/ playback. CARD FULL - Memory card is full. Erase some images ( 56) to free some space or replace the memory card. CHANGE THE BATTERY PACK - Battery pack is exhausted. Replace or charge the battery pack ( 19). DISC ACCESS FAILURE CHECK THE DISC - There was an error when reading the disc or attempting to write onto it. Try cleaning the disc or replace it ( 87). - This message can also appear if condensation has formed. Wait until the camcorder dries completely before resuming use ( 90). - The disc may not be loaded correctly. Try removing the disc and reinserting it ( 27). DISC COVER IS OPEN - Verify the disc is correctly inserted and close the disc cover ( 27). DISC FULL - The disc is full (" END" appears on the screen). Delete some recordings (DVD-RW in VR mode) to free some space ( 37) or replace the disc. DISC IS FINALIZED CANNOT RECORD - You cannot record additional scenes on a finalized DVD-R/DVD-R DL disc. - You cannot record additional scenes or unfinalize a DVD-RW disc in VIDEO mode that was finalized with another digital device. DISC MUST BE FINALIZED TO PLAY BACK IN COMPATIBLE PLAYERS - Be sure to finalize the disc and check the compatibility of the device before playing back the disc on external DVD devices ( 49). LOADING THE DISC - The disc is being read. Wait before you start recording. NAMING ERROR - The folder and file numbers have reached their maximum value. Set the [FILE NOS.] option to [RESET] and erase all the images on the memory card ( 56) or initialize it ( 60). NO CARD - There is no memory card in the camcorder ( 29). NO DISC - No disc is loaded. Insert a disc ( 27). - This message can also appear if condensation has formed. Wait until the camcorder dries completely before resuming use ( 90). NO IMAGES - No images are recorded on the memory card. PRINT ORDER ERROR - You attempted to set more than 998 still images in the print order ( 64). Additional Information • 83