Canon CanoScan FB 1200S User Manual - Page 31

STEP 2 Setting the Shut Off Lamp Time This option turns off the FB1200S lamp to save power if it remains idle for a specified length of time. Click the up or down arrows in the spinbox to increase or decrease the time limit or enter a number directly into the entry box in units of minutes. You can select a time within the range of 10 to 59 minutes. This setting is automatically set to 10 minutes when Plug-in Module CS-S is first installed. Click the up or down arrow in the spinbox to increase or decrease the number setting or enter a number directly into the entry box (10~59). Return to Default Settings Returns the preference settings and all other settings to the factory default settings. The tables list the major default settings. Scan Mode Gamma Setting Magnification Unit Basic Resolution Preview Window Size Control Panel Position 24-bit Color Menu setting (CRT type for B) 100% Pixels 72 dpi 20 dpi Center Close Plug-in After Scan This setting determines whether or not Plug-in Module CS-S closes automatically after completion of the scanning job. After you install Plug-in Module CS-S, this setting is set to on (Plug-in Module CS-S closes at completion of scanning). To turn this feature off, open the [Preferences] menu and select [Close plug-in after scan]. This feature is switched off when you don't see it marked with a check mark. To switch the feature on, click it again to show the check mark. When you are using the optional ADF (Automatic Document Feeder) this feature is grayed-out and cannot be switched on. Flatbed / Auto Document Feeder When an optional automatic document feeder (ADF) is installed on the scanner, the [Flatbed] and [Auto document feeder] options are added to the pull-down menu. A check mark appears beside the current selection. 31 31