Canon EOS 10D 10D_PictBridge.pdf - Page 11

DPOF Printing Start printing. 6 • Turn the < > dial to select [OK], then press < >. s The printing will start. • When the printing ends, the screen will return to step 3. • For the DPOF print type, [Both] cannot be selected. If [Both] is set, the printing will be done according to the [Standard] setting. • The file No. cannot be imprinted. Error Messages If a problem occurs with the printing, an error message will appear on the LCD monitor. Press < > to stop the printing. After resolving the problem, resume printing. To resolve printing problems, refer to the printer's instruction manual. Paper Error Check whether the paper is properly loaded in the printer. Ink Error The printer has run out of ink or the waste ink tank is full. Hardware Error Check for any printer problems other than paper and ink problems. Check the camera's battery level. File Error You attempted to print an image that cannot be printed with PictBridge. Images taken with a different camera or images edited with a computer might not be printable. 11