Canon EOS 1D Mark III User Guide - Page 48

The Custom Functions corresponding to the EOS-1D Mark II N's C. Fn and P. Fn are shown here. New and substantially altered Custom Functions are explained below. Corresponding Custom Functions No. Custom Function EOS-1D Mark II N Function C.Fn I: Exposure 1 Exposure Level Increments Same as C.Fn-06 2 ISO Speed Setting Increments New 3 Set ISO Speed Range Moved to [ISO Expansion]. Setting the max. and min. ISO Speeds are new 4 Bracketing Auto Cancel 5 Bracketing Sequence 6 Number of Bracketed Shots C.Fn-09 and P.Fn-09 are dispersed to C.Fn I-4 and 5 Same as P.Fn-08 7 Spot Metering Link to AF Point C.Fn-13 now separate and independent 8 Safety Shift Setting 1 is same as C.Fn-16, and setting 2 is new 9 Select Usable Shooting Modes Same as P.Fn-01 10 Select Usable Metering Modes Same as P.Fn-02 11 Metering Pattern in Manual Mode Same as P.Fn-03 12 Set Shutter Speed Range Same as P.Fn-04 13 Set Aperture Value Range Same as P.Fn-05 14 Apply Shooting/Metering Mode Based on P.Fn-06. Function partially expanded 15 Flash Sync. Speed in Av Mode Same as EOS 5D C.Fn-03 (Sync speed differs) C.Fn II: Image/Flash Exposure/Display 1 Long Exposure Noise Reduction Same as [Noise reduction] 2 High ISO Speed Noise Reduction New 3 Highlight Tone Priority New 4 E-TTL II Flash Metering Same as C.Fn-14 5 Shutter Curtain Sync. Same as C.Fn-15 6 Flash Firing Same as EOS 5D C.Fn-07 7 Viewfinder Info. During Exposure Same as C.Fn-01 8 LCD Panel Illumination During Bulb Same as P.Fn-24 9 INFO Button When Shooting New No. Custom Function C.Fn III: Autofocus/Drive 1 USM Lens Electronic MF 2 AI Servo Tracking Sensitivity 3 AI Servo 1st/2nd Image Priority 4 AI Servo AF Tracking Method 5 Lens Drive When AF Impossible 6 Lens AF Stop Button Function 7 AF Microadjustment 8 AF Expansion With Selected Point 9 Selectable AF Point 10 Switch to Registered AF Point 11 AF Point Auto Selection 12 AF Point Display During Focus 13 AF Point Brightness 14 AF-Assist Beam Firing 15 Mirror Lockup 16 Continuous Shooting Speed 17 Limit Continuous Shot Count C.Fn IV: Operation/Others 1 Long Exposure Noise Reduction 2 AF-ON/AE Lock Button Switch 3 Quick Control Dial in Metering 4 SET Button When Shooting 5 Tv/Av Setting for Manual Exposure 6 Dial Direction During Tv/Av 7 Av Setting Without Lens 8 WB + Media/Image Size Setting 9 Button Function 10 Button Function When 11 Focusing Screen 12 Timer Length For Timer 13 Shortened Release Timer Lag 14 Add Aspect Ratio Information 15 Add Original Decision Data 16 Live View Exposure Simulation EOS-1D Mark II N Function Same as C.Fn-07 Same as C.Fn-20 C.Fn-21's function expanded New Same as P.Fn-14 Same as C.Fn-19. 6 added. New Based on C.Fn-17 C.Fn-13 now separate and independent Same as C.Fn-18 C.Fn-11-2 and P.Fn-17/18 consolidated together Based on C.Fn-10 C.Fn-10-3 now independent Same as P.Fn-15 Same as C.Fn-12, and 2 added Same as P.Fn-19 Same as P.Fn-20 Same as [Noise reduction] New New Same as EOS 5D C.Fn-01 Same as C.Fn-05 New (Similar to P.Fn-27) C.Fn-05-2/3 now separate and independent New New P.Fn-30 Expanded Same as C.Fn-00 Same as P.Fn-23 Same as P.Fn-26 New Same as P.Fn-31 New C. Fn I-3 is an expanded version of the EOS-1D Mark II N's [ISO expansion]. By selecting [Register], the upper limit can be set to H (ISO 6400) and the lower limit can be set to L (ISO 50). If both H and L are set, it will be the same as the previous camera's [ISO expansion: On]. C.Fn I-3 The EOS-1D Mark II N's C. Fn-09, [Auto bracketing sequence/ cancel], has been split into C. Fn I -4 and 5, [Bracketing sequence]. Both functions can now be set separately. IX. CONTROLS AND DISPLAY C.Fn I-4 48