Canon EOS-1D EOS-1D Instructions - Page 23
Installing and Removing the Battery
UPC - 013803005912
View all Canon EOS-1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Before You Start Installing and Removing the Battery Installing the Battery Detach the battery compartment cap. Grasp both sides of the cap and pull it off. 1 •• The battery's protective cover can be attached to the battery compartment cap. Keep the cap and cover in a safe place. 1 2 •Insert the battery. Insert the battery and while pushing it in, turn the release handle as shown by the arrow. If the battery's rubber lining (for water resistance) is not clean, use a moist cotton swab to wipe it clean. Rubber lining Checking the Battery Level After replacing the battery or before using the camera, check the battery level. Turn the < > switch to < >. s When the < > switch is turned on, the battery check is executed automatically and the battery level is displayed on the top LCD panel. : Battery level OK. : Battery running low. : Battery will be exhausted soon. : Recharge the battery. 23