Canon EOS-1D EOS-1D Instructions - Page 46
White Balance Auto Bracketing
UPC - 013803005912
View all Canon EOS-1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
White Balance Auto Bracketing You can bracket the white balance of three consecutive shots automatically within +/-3 stops in full-stop increments. For each shot, the camera changes the color temperature automatically vis-à-vis the current white balance setting. One stop is equivalent to 5 mired as provided by a color conversion filter. The three-shot bracketing sequence will be as follows: standard color temperature, bluish (minus), and reddish (plus). The current drive mode (→p.99) is used during the bracketing sequence. 1 Press the < > and < > buttons simultaneously. s The rear LCD panel will display the < >. Standard amount 2 •Set the bracketing amount. Let go of the < > button or < > button, then turn the < > dial. s The rear LCD panel will display the bracketing amount, and the icon for the current white balance setting will blink. • After selecting the desired bracketing amount, let go of the < > button and < > button. s While white balance bracketing is active, the icon for the current white balance setting will blink on the rear LCD panel. +/-1 stop +/-2 stops Bracketing amount +/-3 stops 46