Canon EOS Rebel T3 Black EF-S 18-55mm IS II Lens Kit Refurbished EOS REBEL T3 - Page 29
Set the power switch to <, >., Open the cover., Remove the battery., Removing the Battery/Card
View all Canon EOS Rebel T3 Black EF-S 18-55mm IS II Lens Kit Refurbished manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Installing and Removing the Battery and Card After opening the card/battery compartment cover, be careful not to push it back further. Otherwise, the hinge might break. The number of possible shots depends on the remaining capacity of the card, image-recording quality, ISO speed, etc. Setting [1 Release shutter without card] to [Disable] will prevent you from forgetting to insert a card (p.154). Removing the Battery/Card 1 Set the power switch to . (p.31) 2 Open the cover. Make sure the access lamp is off, then open the cover. If "Recording ..." is displayed, close the cover. 3 Remove the battery. Press the battery release lever as shown by the arrow and remove the battery. To prevent short circuiting of the battery contacts, be sure to attach the protective cover (provided, p.26) to the battery. 4 Remove the card. Gently push in the card, then let go. The card will stick out. Pull the card straight out. 5 Close the cover. Press the cover until it snaps shut. 29