Canon PIXMA MX870 Solución de problemas de configuración de red - Page 13
Directly enter the access point name, WEP key 1, WEP 40 bit, WEP Transitional Security Network
UPC - 013803119015
View all Canon PIXMA MX870 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
6 Select Directly enter the access point name, then press the OK button. • If you are living in an apartment, nearby access points in use may be detected. 7 Enter the access point name/network name (SSID) using the Numeric buttons, then press the OK button. For details on how to enter characters, refer to "Character Entry" on page 10. • Enter the same access point name/network name (SSID) as that of the access point on the machine. • For details on how to check the access point name/network name (SSID), refer to the manual supplied with the access point or contact its manufacturer. • Enter upper and lower case letters of the alphabet correctly. Letters are case sensitive. 8 Make sure that the access point name/network name (SSID) is correct, then press the OK button. 10-A WEP WPA/WPA2 Disable 1 Select the WEP key number you want to use, then press the OK button. • When using AirPort, select WEP key 1 in the screen. Selecting other key numbers will disable the connection between the machine and AirPort. 2 Enter the network key, then press the OK button. • Enter upper and lower case letters of the alphabet correctly. Letters are case sensitive. (P.13) (P.13) 3 Make sure that the network key is correct, then press the OK button. Go to on page 13. 9 Select a security protocol for the access point, then press the OK button. • Go to either of the following steps according to the selected security protocol. Disable Go to 13. on page WEP Go to . WPA/WPA2 Go to on page 13. • When WEP 40 bit or WEP 128 bit is selected in AirPort Utility (AirPort Admin Utility), select WEP. • When WEP (Transitional Security Network) is selected in AirPort Utility, select WPA2-PSK (AES). 12