Canon PIXMA MX870 Solución de problemas de configuración de red - Page 3

Problems during Network Setup Easy setup Advanced setup The Target Access Point is Not Displayed (Detected) Check Check 1 Make sure that you follow Check 1, 2, 5 and 6 of "Connection Checklist" on page 15, then press the left FUNCTION button (A) on the machine to search for the access point again. Check 2 A Turn off the access point, then turn it back on, then press the left FUNCTION button (A) on the machine to search for the access point again. Check 3 Is SSID broadcast (connection via "ANY" SSID, etc.) disabled or is the stealth mode enabled on the access point? • For details on how to check the settings of the access point, refer to the manual supplied with the access point or contact its manufacturer. Enable SSID broadcast (connection via "ANY" SSID, etc.) or disable the stealth mode, then press the left FUNCTION button (A) on the machine to search for the access point again. • For details on how to change the settings of the access point, refer to the manual supplied with the access point or contact its manufacturer. To establish a connection without changing the access point settings, refer to "Entering the Access Point's Wireless LAN Settings Directly on the Machine" on page 11. Check 4 Is the MAC address filtering enabled on the access point? • For details on how to check the settings of the access point, refer to the manual supplied with the access point or contact its manufacturer. Set the access point to accept the MAC address of the machine. • For details on how to change the settings of the access point, refer to the manual supplied with the access point or contact its manufacturer. • To check the MAC address of the machine, press the Setup button, then using the { } [ ] and OK buttons, select Device settings > LAN settings > Confirm LAN settings > WLAN setting list, then check MAC address.