Canon PIXMA MX870 Solución de problemas de configuración de red - Page 5

Check 2 Make sure that the DHCP function of the access point is active. • For details on how to check the settings of the access point, refer to the manual supplied with the access point or contact its manufacturer. Enable the DHCP function of the access point, then configure settings again. • For details on how to change the settings of the access point, refer to the manual supplied with the access point or contact its manufacturer. Check 3 Are you using an access point that automatically creates WEP keys? • For details on the access point, refer to the manual supplied with the access point or contact its manufacturer. Check the WEP key (hexadecimal) created automatically on the access point, then enter it on the machine. • For details on how to check the WEP key of the access point, refer to the manual supplied with the access point or contact its manufacturer. Glossary • DHCP function A function to automatically assign required information (IP address, etc.) to computers, printers or other devices connected to the network. Multiple access points with the same name exist. is Displayed Check The message appears when multiple access points with the same name are found. When you have only one access point Select Use one AccessPoint only, then select the MAC address of the target access point. • For subsequent operations, go to or / / in "Entering the Access Point's Wireless LAN Settings Directly on the Machine" on page 11. • For details on how to check the MAC address of the access point, refer to the manual supplied with the access point or contact its manufacturer. When using multiple access points Select Use multiple AccessPoints. • For subsequent operations, go to or / / Wireless LAN Settings Directly on the Machine" on page 11. in "Entering the Access Point's Glossary • MAC address A unique number assigned to each network device.