Canon PowerShot A400 Silver PowerShot A400 Camera User Guide - Page 44
Press, on the omni, selector to display, Shoot the image.
View all Canon PowerShot A400 Silver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Shooting - The Basics Macro/ Infinity Modes Shooting Mode Use this mode when the distance from the lens tip to the subject is in Macro the range of 5 to 47 cm (2.0 in. to 1.5 ft.) at wide angle end and 30 to 47 cm (1.0 to 1.5 ft.) at telephoto end. Use this mode to shoot Infinity landscapes. Also use this mode for compositions combining both near and distant objects. 1 Press / ( on the omni selector) to display or . z Pressing / ( on the omni selector) cancels the macro mode. 2 Shoot the image. z Shooting procedures are the same as for the Auto Mode (p. 31). z The indicator beside the viewfinder will light yellow when the shutter button is pressed halfway. 42 If the flash is used in macro mode, the light may not be controlled correctly. In this case, set a higher ISO sensitivity or use other lightings instead of using the flash. z Always use the LCD monitor to compose images in macro mode. Shooting with the viewfinder is possible, however, part of the image may not appear in the final shot (p. 33). z When the lens is zoomed out to the wide angle end, the recordable area is approx. 47 × 35 mm (1.9 × 1.4 in.)*1, and at telephoto end, it is 115 × 87 mm (4.5 × 3.4 in.).*2 When the zoom position is located between the telephoto end and the wide angle end, the distance between the front of the lens and the subject will be the same as the telephoto end. z The exposure may not be optimal when the flash is used in macro mode. *1 Closest focal distance. *2 Maximum optical telephoto setting.