Canon PowerShot A400 Silver PowerShot A400 Camera User Guide - Page 81
Select, ISO Speed from the, FUNC. menu., Press, select the ISO, speed., Press the FUNC. button.
View all Canon PowerShot A400 Silver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
- The zoom is positioned to the telephoto end setting. Set the digital zoom to [Off]. - A mode other than , is selected. In , mode, white balance data cannot be read. - The flash is set to (Flash On) or (Flash Off). Use the same flash setting as the one that will be used for shooting when you set the white balance. If the white balance setting conditions and shooting conditions are not the same, the correct white balance may not be obtained. When the flash is set to , (Auto with redeye reduction) or (Auto), the flash may fire while the white balance data is recorded to the custom white balance. If this happens, make sure the flash also fires when you shoot the image. - The ISO speed is set to the same setting to shoot the image. z The custom white balance setting is not canceled even if settings are reset to default settings (p. 72). Shooting - Advanced Functions Changing the ISO Speed Shooting Mode Raise the ISO speed when you wish to reduce camera shake, when turning the flash off for use in dark conditions, or when a fast shutter speed is required. 1 Select *(ISO Speed) from the FUNC. menu. z See Selecting Menus and Settings (p. 62). * The current setting is displayed. 2 Press or to select the ISO speed. z A shot can be taken immediately by pressing the shutter button. The menu will reappear after the shot, allowing you to adjust the setting. 3 Press the FUNC. button. 79