Canon PowerShot A570IS PowerShot A570 IS Camera User Guide Advanced - Page 88
Image is blurred or out of focus., Subject in recorded image is too dark., Subject in recorded image
UPC - 013803078442
View all Canon PowerShot A570IS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Image is blurred or out of focus. The camera moves when the shutter button is pressed. z Confirm the procedures in " appears" (p. 84). AF-assist Beam is set to [Off]. z In dark places where it is difficult for the camera to focus, the AF-assist Beam will emit to assist focusing. As the AF-assist Beam will not function when turned off, set it [On] to activate it (p. 21). Take care not to obstruct the AF-assist Beam with your hand when used. Subject is out of focal range. z Shoot with the subject at the correct focusing distance (p. 112). The subject is hard to focus z Use the focus lock, AF lock or on. manual focus to shoot (p. 45). Subject in recorded image is too dark. Insufficient light for shooting. z Set the flash to (Flash on) (Basic Guide p. 12). The subject is z Set the exposure compensation to underexposed because the a positive (+) setting (p. 49). surroundings are too bright. z Use the spot metering functions (p. 48). Subject is too far away for flash to reach. z Shoot within correct flash range of the subject when using the built-in flash (p. 113). z Raise the ISO speed and then shoot (p. 53). Subject in recorded image is too bright, or image flashes white. Subject is too close, making z Shoot within correct flash range of the flash too strong. the subject when using the built-in flash (p. 113). z Turn [On] the Safety FE (p. 56). 86