Canon PowerShot A75 PowerShot A75 Camera User Guide - Page 21
Battery Status Indications - low battery warning
View all Canon PowerShot A75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
zIf you do not plan to use the camera for a long time, remove the batteries from the camera and store them in a safe place. Batteries may leak and damage the camera if left installed during prolonged periods of non-use. However, the date, time and other camera settings may reset to default settings if the batteries have been removed for more than three weeks. Preparing the Camera The positive electrode (plus terminal) is flat. The negative terminal is correctly formed (protruding from the metal base), but the seal does not extend up over the edge of the metal base. WARNING Never use damaged batteries or batteries whose outer seal is completely or partially missing or peeled off, as there is risk that such batteries may leak, overheat, or burst. Always check the seals on store-bought batteries before loading them, as some batteries may come with defective seals. Do not use batteries with defective seals. Never use batteries that look like this. Batteries with all or part of the seal (electrical insulation sheath) peeled off. Battery Status Indications The LCD monitor displays an icon or message to let you know when batteries are low or depleted. Batteries are beginning to run low. Replace (or recharge) batteries promptly. Replace or recharge the batteries if you wish to continue using the camera. If the LCD monitor is off, this icon will appear when you press any of the following buttons: DISP., or / MF. Batteries are fully depleted and the Change the camera can no longer operate. You batteries should replace the batteries immediately. 19