Canon PowerShot G5 User Guide - Page 36

Turning the Power On / Off (continued) • You will hear a start-up sound and see the start-up image when the power comes on. (To change the start-up sound and image, see below and pages 46 and 166.) • The start-up image does not appear when the LCD monitor is off or the terminal is connected to a TV. Turning on the camera without the start-up sound and image Press and hold the button, then turn on the power. Power-saving Function The camera is equipped with a power-saving function. If [Auto Power Down] is set to [On], the power goes off according to the following conditions. Shooting Mode: Powers down approximately three minutes after the last time a camera control is accessed. The LCD monitor will shut off approximately three minutes after the last time a camera control is accessed even if the power-saving function is turned off. Replaying Mode: Powers down approximately five minutes after the last time a camera control is accessed. Printer Connection Mode: Powers down approximately five minutes after the last time a camera control is accessed on the camera or something is printed on the printer. • Turning the mode lever toward or will restore power when the camera shuts down with the power-saving function. • Please note that the camera continues to consume a minimal amount of power even when the power-saving function shuts it down. • The power-saving function is disabled while a slide show plays on the camera or during a computer connection (p. 124, p.155). • You can turn off the power-saving function in the [ (Set up)] menu (p. 162). 30