Canon PowerShot SD700 IS PowerShot SD700 IS / DIGITAL IXUS 800 IS Camera User - Page 24

Indicators The camera indicators light or flash under the following circumstances. Never do the following while a green indicator is flashing. These actions may corrupt image data. - Shake or jolt the camera - Shut off the power, or open the memory card slot/battery cover zUpper Indicator Green: Ready to shoot Blinking Green: Image recording/reading/erasing/transferring (when connected to a computer) Orange: Ready to shoot (flash on) Blinking Orange: Ready to shoot (camera shake warning) zLower Indicator Yellow: Macro mode/infinity mode/AF lock mode Blinking Yellow: Focusing difficulty (camera beeps once) Power Saving Function This camera is equipped with a power saving function. The power will shut off in the following circumstances. Press the power button again to restore power. Shooting Mode Powers down approximately 3 minutes after the last control is accessed on the camera. The LCD monitor automatically turns off 1 minute* after the last control is accessed even if [Auto Power Down] is set to [Off]. Press any button other than the power button or change the camera orientation to turn the LCD monitor back on. Playback Mode Powers down approximately 5 minutes after the last Connected to a Printer control is accessed on the camera. * This time can be changed. z The power saving function will not activate during a slide show or while the camera is connected to a computer. z The power saving function settings can be changed (p. 29). 22