Canon Speedlite 380EX Instruction Manual - Page 7
Mounting, Speedlite, Power, Switch, Flash
View all Canon Speedlite 380EX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
IIL 2. Mounting the Speedlite Loosen the locking collar by turning it as shown by the arrow. 2 Slip the Speedlite's mounting foot on the camera's hot shoe until it stops. I n Turn the locking collar as shown by the arrow and tighten. (The mounting foot's locking pin extends into the hot shoe.) • To detach the Speedlite, turn the locking collar in the opposite direction until it stops. (The locking pin retracts into the mounting foot.) r7_7i Although the hot shoe on the EOS 650, EOS 620, EOS 750, and EOS 850 does not have a locking pin hole, Speedlite 380EX can still be mounted on these cameras. 3. Power Switch o o o o o 24 28 35 50 70 105 OPILOT CD 4. FP Flash Swr o o o o o 24 28 35 50 70 105 Oi r I TOD Set the power switch as follows: 0 : To turn off the power. I :To turn on the power. If the Speedlite is left unused for about 90 sec., it turns off automatically to save battery power. To turn on the Speedlite again, press the shutter button or press the test firing button. Use this switch to set highspeed sync. Q : For normal sync. '4i: For high-speed sync. When Speedlite 380EX is used with a Type-A camera and the switch is set for high-speed sync, using a shutter speed faster than the camera's maximum sync speed sets the highspeed sync mode and using a shutter speed slower than the maximum sync speed sets the normal sync mode. • When a Type-B camera is used, normal sync mode is set regardless of this switch's setting. 12 13