Canon Speedlite Transmitter ST-E3-RT Instruction Manual - Page 26
Fully Automatic Wireless Flash Shooting
View all Canon Speedlite Transmitter ST-E3-RT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
a: Fully Automatic Wireless Flash Shooting This section describes basic fully automatic wireless shooting when using a transmitter attached to the camera (master) and a wirelessly controlled flash (slave). Autoflash Shooting Using One Slave Unit 1 Set the flash as the slave unit. For the slave unit settings, see the flash's instruction manual. Set A, B or C as the firing group. The flash will not fire if it is set to D or E. 2 Check the channel and ID. If the channels and IDs of the master unit and slave unit are different, set them to the same numbers (p.21, 22). 3 Position the camera and the flash. Position them within the range shown on page 16. 4 Set the flash mode to . Press the button on the master unit and set the flash mode to . The slave unit is set automatically to during shooting via the control from the master unit. 24