Canon Speedlite Transmitter ST-E3-RT Instruction Manual - Page 27
Check the transmission status, and that the flash is ready., Check the operation., Take the picture.
View all Canon Speedlite Transmitter ST-E3-RT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
a: Fully Automatic Wireless Flash Shooting 5 Check the transmission status and that the flash is ready. Check that the lamp is lit in green. When the slave flash is ready, the AF-assist beam emitter blinks at 1-second intervals. Check that the slave flash-ready icon is lit on the master unit's LCD panel. When the recycling of all the flash units is completed, the master unit's charge lamp lights. 6 Check the operation. Press the master unit's test flash button (charge lamp). X The slave unit flashes. If the slave unit does not fire, check that it is placed within the operation range. 7 Take the picture. Set the camera and take the picture, in the same way as with normal flash shooting. X If a standard flash exposure was obtained, the flash exposure confirmation lamp lights for 3 sec. If the lamp is red, radio transmission has not been established. Check again the transmission channels and wireless radio IDs of the master unit and slave unit. If you cannot connect with the same settings, turn the power off and on again. 25