Canon iPF8000S User Manual for Windows - Page 235

Output Stacker Using the Output Stacker The Output Stacker can be installed at four positions, as shown. Output Stacker • When storing printed documents on the Output Stacker Use position (1). • When the Output Stacker is not used Use position (2). • When the Media Take-up Unit is used, or when the Output Stacker is stored for long periods Lower it to position (3) for storage. (→P.226) When using the Output Stacker again after storage, reattach the Basket Rod on the front of the Output Stacker to the tips of the left and right Basket Arms and pull the side rods out completely. • When printing on large, stiff sheets Use position (3). Set it to position (4) for large-format printing or when printing on delicate paper. (→P.223) Important • When storing printed documents on the Output Stacker, always use it in position (1). If you do not, printed documents may not be dropped into the Output Stacker, and the printed surface may become soiled. • The Output Stacker can hold one sheet. When printing multiple pages, remove each sheet after it is printed. • Before using the Output Stacker, remove the Rewind Spool. If you do not, it may prevent printed documents from being held correctly, and it they may be scratched. • The Output Stacker can hold printed documents from rolls that are 62 inches (1,575 mm) long. When printing longer documents, eject them in front of the printer or use the optional Media Take-up Unit. Handling Paper 221