Canon iPF8000S User Manual for Windows - Page 787

Messages regarding paper The roll is empty. Cause There is no more paper left on the roll. Corrective Action Follow the steps below to replace the used roll with a new roll of the same type and size. 1.Remove the roll. (→P.186) (→P.181) 2.Load the new roll. (→P.182) 3.If no barcode was printed on the roll, specify the paper type. (→P.188) 4.If no barcode was printed on the roll, specify the paper length. (→P.189) Rewinding error. Cause Corrective Action There is some foreign object near the Media Take-up Remove the foreign object near the sensor. Unit sensor and the roll cannot be detected. The Media Take-up Unit sensor is soiled and the roll Wipe the sensor with a dry cloth to clean it. cannot be detected. The roll is out of range of detection of the Media Take-up Unit sensor. Reload the roll. (→P.182) The Media Take-up Unit sensor is damaged. Contact your Canon dealer for assistance. * Printing will stop momentarily if an error involving the Media Take-up Unit occurs. If you prefer printing not to stop, set Skip Take-Up Err to On. Turn on the media take-up unit. Cause The Media Take-up Unit was off when you selected Enable for Take-up Reel . Corrective Action Turn the Media Take-up Unit on. Media take-up unit ready. Cause Corrective Action The Take-up Reel setting in the printer MAIN MENU Press the Stop button and stop printing. was changed from Enable to Disable , but a print job The mode switches from take-up mode to regular was received before the roll was removed. mode after you change the Take-up Reel setting in the MAIN MENU from Enable to Disable and lift the Release Lever , or after you execute Paper Cutting . Press the Online button to resume printing. Error Message 773