Canon iPF8000S User Manual for Windows - Page 791

Messages regarding printing or adjusment Messages regarding printing or adjusment Use another paper. Cause The Printhead and feed amount cannot be adjusted when highly transparent lm is loaded. Corrective Action We recommend using a type of paper that you often use, other than lm, for Printhead adjustment. (→P.649) Adjust the feed amount manually. (→P.657) Cannot execute this command. Use other paper. Cause Corrective Action The loaded paper cannot be used for color calibration. Load paper compatible with color calibration.*1 See "Paper Reference Guide ." (→P.169) *1: Always make sure the loaded paper matches the media type setting on the printer. Adjustment cannot be completed correctly unless the setting value matches the loaded paper. Cannot print as specied. Lift the release lever and replace paper with A4/LTR (vertical) or larger Cause The loaded paper is too small. Corrective Action Switch to paper A4/Letter (vertical) or larger. Lift the release lever and replace roll with 10 in. wide or larger roll Cause The loaded paper is too small. Corrective Action Load a roll 10 inches wide or larger. Cannot adjust band. Cause The Printhead nozzles are clogged. Corrective Action Follow the steps below to check the nozzles. 1.Print a test pattern to check the nozzles. (→P.692) 2.Clean the Printhead if the nozzles are clogged. (→P.693) Highly transparent lm is loaded that cannot be used Adjust the feed amount manually. for feed amount adjustment. (→P.657) Error Message 777