Canon imageCLASS MF4270 imageCLASS MF4270 Starter Guide - Page 12
Connect the Power Cord and Turn On the Machine
View all Canon imageCLASS MF4270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Set Up the Machine Connect the Power Cord and Turn On the Machine 1 Connect the power cord into the rear socket on the back side of the machine and the wall outlet, and press the [I] side of the main power switch (A) to ON. 2 The machine enters the standby mode. Ex. 100% LTR TEXT/PHOTO 1 ● The LCD display turned off: The machine may enter the sleep mode while you are setting up the machine. Press [Energy Saver] to turn the machine back on and continue the setup. ● is displayed: Make sure that the toner cover and scanning platform are closed properly. (See "Install Toner Cartridge," on p. 5.) ● is displayed: Check the installation of the toner cartridge and the placement of the paper. (See "Install Toner Cartridge," on p. 5 and "Set Up the Paper Cassette and Load Paper," on p. 8.) Any data stored in the memory, including received fax documents, will be deleted if you turn off the main power switch of the machine. 10