Canon imageFORMULA P-215 Scan-tini Personal Document Scanner Reference Guide - Page 10

0-00-P-215_RG_EN.book Page 9 Wednesday, August 24, 2011 11:45 AM Scanning with CaptureOnTouch Lite 1. Connecting the Scanner to the Computer A Turn ON the computer. B Set the Auto Start switch on the scanner to ON. C Connect the scanner to the computer using the supplied USB cable. (Connect the power supply USB cable, if necessary.) Set to ON. 2. Turning ON the Scanner The scanner automatically turns ON or OFF, respectively, when the feed tray is opened or closed. A B C USB USB Cable Power Supply USB Cable (Used only for higher speed scanning.) Notes on Connecting the Scanner • When operating the scanner via applications such as CaptureOnTouch (supplied), make sure to set the Auto Start switch to OFF. • If the scanner is not connected in the order above, the computer may not start up. • Make sure to set the Auto Start switch to ON before connecting the scanner to the computer. If the Auto Start switch is set to ON after the scanner is connected to the computer, malfunctions may occur. • The Power button may blink slowly when the USB cable is connected and the feed tray is opened. When this occurs, wait for the power indicator to stop blinking and light steadily before using the scanner. • Do not close the feed tray before the main screen of CaptureOnTouch Lite appears. • If you are using Windows XP, a message requesting that you restart your computer may appear when you turn ON the scanner. You can continue normal use even if you click [No] and do not restart the computer. 9