Canon imagePROGRAF TM-300 MFP Z36 imagePROGRAF TM-300 series User Manual - Page 323
Adjusting Line Misalignment
View all Canon imagePROGRAF TM-300 MFP Z36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 323 highlights
Adjusting Line Misalignment If printed lines are misaligned, execute Print head angle adjustment to adjust the print head angle. Print head angle adjustment requires you to examine a printed test pattern and adjust the angle using the angle adjustment lever. Always adjust the print head angle after replacing the print head. Important • Because the results of adjustment vary depending on the type of paper used for adjustment, use the same type of paper as you will use for printing. • When using cut sheets, do not move the release lever until instructions (guidance) for removing the paper are displayed. Moving the release lever during printing or maintenance operations will cause the printer to stop. Paper to Prepare When using rolls An unused roll at least 10.00 inches (254.0 mm) wide When using sheets One sheet of unused paper of at least A4/Letter size Perform adjustment as follows. 1. Load paper. Loading Rolls on the Roll Holder Loading Rolls in the Printer Loading Sheets in the Printer Important • Always make sure the loaded paper matches the type of paper specified on the printer. Adjustment cannot be completed correctly unless the loaded paper matches the settings. 2. Tap (Setup) > Maintenance on HOME screen. Touch Screen The Maintenance screen appears. 3. Tap Print head angle adjustment. A confirmation message appears. 4. Tap Yes. The carriage moves and the guidance for the print head angle adjustment procedure appears on the touch screen. 323