Canon imagePROGRAF TM-300 MFP Z36 imagePROGRAF TM-300 series User Manual - Page 561

Roll Paper Safety Margin Allows you to specify the length of the white margins on the edges of the paper in order to make even significantly curled paper adsorb to the platen. Printer Default Applies the settings configured in the control panel of the printer unit. 3mm Prints in standard-size. Choose this setting if there are no particular problems when printing. 20mm Choose this setting in case of chafing against the print head, for example when using significantly curled paper. Cut Speed Allows you to select the speed of automatic cutting. Use it to adjust the automatic cutting function when clean cutting is not possible. Printer Default Applies the settings configured in the control panel of the printer unit. Fast Choose this if clean cut surfaces are not possible with the Standard setting. Standard Choose this if there are no particular problems with automatic cutting. Slow Choose it when using adhesive paper in order to prevent the glue from sticking to the cutter and to avoid a drop in cutting performance. Unidirectional Printing Suppresses uneven coloring and line shifts during printing. To perform unidirectional printing, check this check box. 561