Canon imagePROGRAF TM-300 series User Manual - Page 516

4. Tap Settings. 5. Tap Enable/disable Wireless Direct and tap Yes. 6. Confirm displayed message and tap OK. After Wireless Direct is enabled, the identifier (SSID) etc. when using the printer with wireless direct connection are displayed. By flicking the touch screen, you can check various settings of wireless direct. Note • The identifier (SSID) and password are specified automatically. • By tapping Show password, you can check the password. The password is required when connecting a device to the printer. (Depending on the device you are using, no password is required.) • By tapping Settings, you can change the following settings. • Enable/disable Wireless Direct • Update SSID/password • Wireless Direct device name • Connection request confirmation For updating the SSID / password or changing the name of the printer displayed on Wi-Fi Direct compatible device, see Change Wireless Direct Connection Setting. Connect Wi-Fi Direct Compatible Devices such as Smartphones and Tablets to the Printer 1. Turn on Wi-Fi communication on Wi-Fi Direct compatible device. For more on turning on Wi-Fi communication, see your device's instruction manual. 2. Select "DIRECT-XXXX-TM-300" ("X" represents alphanumeric characters) from list displayed on device. Note • If "DIRECT-XXXX-TM-300" does not appear on the list, wireless direct is not enabled. See Change the Printer Setting to Wireless Direct Connection to enable wireless direct. • You can change the name of the printer displayed on Wi-Fi Direct compatible devices. See Change Wireless Direct Connection Setting as necessary. 3. Enter password on Wi-Fi Direct compatible device. The device is connected to the printer. 516