Canon imagePROGRAF TM-300 series User Manual - Page 570

Problems with the Printing Quality Printing is faint Paper rubs against the Print Head The edges of the paper are dirty The surface of the paper is dirty The back side of the paper is dirty Immediately after borderless printing, the trailing edge margin is soiled during regular printing Printed colors are inaccurate Banding in different colors occurs Colors in printed images are uneven Image edges are blurred or white banding occurs The contrast becomes uneven during printing The length of printed images is inaccurate in the feeding direction Images are printed crooked Documents are printed in monochrome Line thickness is not uniform Lines or colors are misaligned Borders appear in borderless printing Cannot Print over Network Cannot Connect Printer to Network Cannot Print over TCP/IP Network Cannot Print over Bonjour networks (macOS) Cannot Find Printer on Network Cannot Find Printer on Check Printer Settings Screen (Windows) Cannot Proceed beyond Printer Connection Screen/Connect Cable Screen Searching Printer by IP Address or Host Name During Setup Cannot Find Printer while Using Wi-Fi Cannot Find Printer while Using Wired LAN Cannot Print Using AirPrint Installation Problems Removing Printer Software Taking Time to Setup Process (Windows) Failed to Printer Driver Installation (Windows) HP-GL/2 problems With HP-GL/2, printing is misaligned Lines or images are missing in printed HP-GL/2 jobs Lines are printed too thick or thin in HP-GL/2 print jobs HP-GL/2 jobs are printed in monochrome (or color) Printed colors of lines are inaccurate during HP-GL/2 printing HP-GL/2 jobs are printed 6 mm larger than specified HP-GL/2 jobs are printed at maximum size, even if a standard size is specified HP-GL/2 printing takes a long time The printer stops when printing a HP-GL/2 job (the carriage stops moving) 570