Canon imagePROGRAF TM-300 series User Manual - Page 552

drag the slider toward the right and darker as you drag the slider toward the left. You can also directly enter brightness values that are linked to the slider bar. Enter a value in the range from -50 to 50. Contrast The Contrast function changes the differences between light and dark in images during printing. To make the differences between the light and dark portions of images greater and more distinct, increase the contrast. On the other hand, to make the differences between the light and dark portions of images smaller and less distinct, reduce the contrast. You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50. Important • When Monochrome or Monochrome Bitmap is selected in Color Mode under Quality & Media, the color balance (Cyan, Magenta, Yellow) are unavailable. • If Monochrome Bitmap is selected for Color Mode in Quality & Media, Brightness and Contrast cannot be set. • If you select ColorSync for Color Matching, then the color balance (Cyan, Magenta, Yellow), Brightness, and Contrast appear grayed out and are unavailable. Related Topics Specifying Color Correction Adjusting Color Balance Adjusting Brightness Adjusting Contrast 552