Casio 140CR User Manual - Page 38

Troubleshooting, Specifications - paper rolls

Page 38 highlights

Part 4 USEFUL INFORMATION 1. Troubleshooting Symptom/Problem Most common causes Solutions 1 E01 appears on the display. Changing modes without complet- Return mode switch to where it stops buzz- ing transaction. ing and press p. 2 E08 appears on the display. Sign on operation is not performed. Prior to starting registration of operation, press Z~< and any other then :. 3 E94 appears on the display. Printer paper is jammed. Remove jammed paper. Turn Mode switch to OFF then turn to ON, or Turn power OFF and then turn power ON. 4 No date on receipt. Paper is not advancing enough. Printer is programmed as a journal. Program printer to print receipts. 5 Drawer opens up after ringing up Department is programmed as a only one time. single item dept. Program the dept. as a normal dept. 6 Not clearing totals at end of day after taking report. Using X mode to take out reports. Use Z mode to take out reports. Programming is lost whenever 7 register is unplugged or there is Bad or no batteries. a power outage. Put in new batteries. 8 Register is inoperative. Can't get money out of drawer. No power. Pull lever underneath register at rear. 9 E90 appears on the display. Totals remain in the memory. Issue the general control reset report, periodic reset report and PLU reset report. 2. Specifications INPUT METHOD Entry: 10-key system; Buffer memory 8 keys (2-key roll over) Display (LED): Amount 8 digits (zero suppression); Department/PLU No.; No. of repeats PRINTER Journal: (or receipt) Paper roll: 12 digits (Amount 10 digits, Symbol 2 digits) Automatic paper roll winding (journal) 58 mm × 80 mm ∅ (Max.) CALCULATIONS Entry 8 digits; Registration 7 digits; Total 8 digits CALCULATOR FUNCTION 8 digits; Arithmetic calculations; Percent calculations Memory protection batteries: The effective service life of the memory protection batteries 3 (UM-3, or R6P (SUM-3) type batteries) is approximately one year from installation into the machine. Power source/Power consumption: See the rating plate. Operating temperature: 0°C to 40°C (32°F to 104°F) Humidity: 10 to 90% Dimensions/Weight: 188 mm(H)× 330 mm(W)× 360 mm(D) with S drawer 4 kg with S drawer 205 mm(H)× 410 mm(W)× 450 mm(D) with M drawer 8 kg with M drawer Specifications and design are subject to change without notice. E 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

38
E
1. Troubleshooting
Symptom/Problem
Most common causes
Solutions
1
E01 appears on the display.
Changing modes without complet-
ing transaction.
Return mode switch to where it stops buzz-
ing and press
p
.
2
E08 appears on the display.
Sign on operation is not performed.
Prior to starting registration of any other
operation, press
Z
~
<
and then
:
.
3
E94 appears on the display.
Printer paper is jammed.
Remove jammed paper. Turn Mode switch
to OFF then turn to ON, or Turn power OFF
and then turn power ON.
4
No date on receipt.
Paper is not advancing enough.
Printer is programmed as a journal. Program printer to print receipts.
5
Drawer opens up after ringing up
only one time.
Department is programmed as a
single item dept.
Program the dept. as a normal dept.
6
Not clearing totals at end of day
after taking report.
Using X mode to take out reports.
Use Z mode to take out reports.
7
Programming is lost whenever
register is unplugged or there is
a power outage.
Bad or no batteries.
Put in new batteries.
8
Register is inoperative.
Can’t get money out of drawer.
No power.
Pull lever underneath register at rear.
9
E90 appears on the display.
Totals remain in the memory.
Issue the general control reset report, peri-
odic reset report and PLU reset report.
2.
Specifications
INPUT METHOD
Entry:
10-key system; Buffer memory 8 keys (2-key roll over)
Display (LED): Amount 8 digits (zero suppression); Department/PLU No.; No. of repeats
PRINTER
Journal:
12 digits (Amount 10 digits, Symbol 2 digits)
(or receipt)
Automatic paper roll winding (journal)
Paper roll:
58 mm
×
80 mm
(Max.)
CALCULATIONS
Entry 8 digits; Registration 7 digits; Total 8 digits
CALCULATOR FUNCTION
8 digits; Arithmetic calculations; Percent calculations
Memory protection batteries:
The effective service life of the memory protection batteries 3 (UM-3, or R6P (SUM-3) type
batteries) is approximately one year from installation into the machine.
Power source/Power consumption: See the rating plate.
Operating temperature:
0°C to 40°C (32°F to 104°F)
Humidity:
10 to 90%
Dimensions/Weight: 188 mm(H)
×
330 mm(W)
×
360 mm(D) with S drawer
4 kg with S drawer
205 mm(H)
×
410 mm(W)
×
450 mm(D) with M drawer
8 kg with M drawer
Specifications and design are subject to change without notice.
USEFUL INFORMATION
Part 4