Casio 60SR User Guide - Page 16

Troubleshooting • Power Supply Nothing appears on the display. Possible Cause Action Low batteries Replace batteries. Batteries loaded incorrectly Remove batteries and reload them correctly. • Text Input Possible Cause FUNC key has been pressed. Cannot input text. Action Press ESC to clear FUNC key operation. Tape does not come out when PRINT is pressed. Possible Causes Action Back cover is not closed completely. Securely close the back cover. No more tape left in the cartridge. Replace the tape cartridge with a new one. Tape jam Remove the tape cartridge and pull out the jammed tape by hand. Cut off excess tape with scissors, and carefully replace the cartridge into the label printer. Important! Never allow the tape outlet to become blocked and never touch tape as it is being fed during printing. Tape comes out when PRINT is pressed, but nothing is printed on it. Possible Cause Action Only blank spaces were input. Input the text you want to print. Printing is blurred, blotched, broken, etc. Possible Causes Action Improper print density setting Adjust the print density setting. Improper loading of the cartridge Remove the tape cartridge and reload it correctly. Dirty print head or rubber Clean the printer head and roller. roller Ink ribbon is being fed from the tape outlet along with the tape. Possible Cause Action Tape cartridge loaded while the ink ribbon is slack. Remove the tape cartridge and check to make sure the ink ribbon is not broken. Next, take up any slack in the ink ribbon and then reload the tape cartridge. Important! • Before loading a tape cartridge into the label printer, always make sure you take up any slack in the ink ribbon first. • If the ink ribbon is broken, you must change to another tape cartridge. E-15