Casio 60SR User Guide - Page 17

• Tape Cutting Possible Cause Tape cutter blade is dull. Cannot cut tape. Action Take the label printer to the dealer from whom you purchased it to have the tape cutter blade replaced. Printed text is cut off by tape cut operation. Possible Causes Action Out of tape Replace the tape cartridge with a new one. • Using Labels Label will not adhere to a surface. Possible Causes Action The backing paper is still Peel the backing paper from the back of the on the back of the tape. tape to expose the adhesive. Surface is unsuitable for Labels do not adhere well to surfaces that are affixing a tape. rough, wet, oily, or dirty. E-16 Error Messages Message Possible Causes Action BATT • Battery power is too low. • Replace batteries. ERR! * This message appears on the screen for about one second. • Attempt to input two B marks within the same text. • Attempt to input B mark while 6mm is specified as the tape width. • Label text containing a B mark was input and then tape width specification was changed to 6mm. (ERR! message appears when you try to perform a print operation.) • Attempt to recall call text from memory when memory is empty. • Attempt to store text into memory when there is no text on the input display. • Use only one B mark. Only two lines of text can be input, so text can contain only one B mark. • Do not use B marks. 6mm tape can have only one line of text, so text cannot contain any B marks. • Delete the B mark to print on 6mm tape or switch back to a wider tape. ERR! • Memory data has become • Initialize the Label corrupted for some Printer. reason. Perr (Printer Error) • Tape jam during printing. • Turn off power, remove the tape cartridge, and clear the tape jam. If the printer error message reappears after you clear the tape jam, request servicing from your original dealer.