Cisco CP-7961G Administration Guide - Page 82
IP address of the Dynamic Host Configuration Protocol
View all Cisco CP-7961G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Network Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone Table 4-3 IPv4 Configuration Menu Options (continued) Option DNS Server 1 DNS Server 2 DNS Server 3 DNS Server 4 DNS Server 5 DHCP Server DHCP Address Released Alternate TFTP Description To Change Primary Domain Name System (DNS) server (DNS Server 1) and optional backup DNS servers (DNS Server 2-5) used by the phone. 1. Unlock network configuration options. 2. Set the DHCP option to No. 3. Scroll to the appropriate DNS Server option, press the Edit softkey, and then enter a new DNS server IP address. 4. Press the Validate softkey. 5. Repeat Steps 3 and 4 as needed to assign backup DNS servers. 6. Press the Save softkey. IP address of the Dynamic Host Configuration Protocol (DHCP) server from which the phone obtains its IPv4 address. Display only-Cannot configure. Releases the IPv4 address assigned by DHCP. 1. Unlock network configuration options. 2. Scroll to the DHCP Address Released option and press the Yes softkey to release the IP address assigned by DHCP, or press the No softkey if you do not want to release this IP address. 3. Press the Save softkey. Indicates whether the phone is using an alternative TFTP 1. Unlock network configuration server. options. 2. Scroll to the Alternate TFTP option and press the Yes softkey if the phone should use an alternative TFTP server. 3. Press the Save softkey. 4-10 Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP) OL-21011-01