Cisco SPA901-UK Provisioning Guide - Page 93
Internal Error Codes
UPC - 745883570751
View all Cisco SPA901-UK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Provisioning Field Reference Internal Error Codes 4 Parameter Name UID1 UID2 ISCUST Description and Default Value The contents of the Line 1 User_ID configuration parameter (Firmware 2.0.11 and above). The contents of the Line 2 User_ID configuration parameter (Firmware 2.0.11 and above). Value=1 if unit is customized, 0 otherwise; customization status viewable on WebUI Info page. Internal Error Codes The IP Telephony Device defines a number of internal error codes (X00-X99) to facilitate configuration in providing finer control over the behavior of the unit under certain error conditions. Parameter Name X00 X20 X40 X60 Description and Default Value Transport layer (or ICMP) error when sending a SIP request. SIP request times out while waiting for a response. General SIP protocol error (for example, unacceptable codec in SDP in 200 and ACK messages, or times out while waiting for ACK). Dialed number invalid according to given dial plan. Cisco Small Business IP Telephony Devices Provisioning Guide 92