Cisco WS-C2950T-24 Software Guide - Page 312
LRE CPE Messages - firmware
View all Cisco WS-C2950T-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 312 highlights
Error Message and Recovery Procedures Appendix A System Messages LRE CPE Messages This section contains the Long-Reach Ethernet (LRE) customer premises equipment (CPE) initialization error messages. Error Message LRE_CPE-3-NOVERCKSUM: Could not fetch CPE firmware version and checksum on interface [chars]. Explanation Could not retrieve the CPE firmware version and checksum. Recommended Action Verify that the CPE has a microcontroller. Make sure that the CPE has the latest firmware. Make sure that there is an LRE link. Error Message LRE_CPE-3-UNKNOWNMODEL: CPE has unrecognizable model number [chars] on interface [chars] Explanation The model number string in the CPE EEPROM does not match a known CPE model number. Recommended Action If this is a Cisco supported CPE, the model number string in the CPE EEPROM must be reprogrammed. Error Message LRE_CPE-3-WRONGAPPVER: CPE on interface [chars] reported unsupported version of application firmware [chars]. Minimum application firmware version needed [chars] Explanation Each CPE requires a currently supported application firmware version for it to function correctly. This CPE has a application firmware version that predates the earliest supported version. Recommended Action Upgrade the application firmware on the CPE to a version that supports the current requirements. Error Message LRE_CPE-3-WRONGBOOTVER: CPE on interface [chars] reported unsupported version of bootloader firmware [chars]. Minimum bootloader firmware version needed [chars] Explanation Each CPE requires a currently supported bootloader firmware version for it to function correctly. This CPE has a bootloader firmware version that predates the earliest supported version. Recommended Action Upgrade the bootloader firmware on the CPE to a version that supports the current requirements. Error Message LRE_CPE-3-WRONGPATCH: CPE on interface [chars] has wrong patch version [hex]. Patch version [hex] or higher is needed for this CPE. Explanation Each CPE requires a currently supported patch version for it to function. This CPE has a patch version that predates the earliest supported version. Recommended Action Upgrade the patch on the CPE to a recent version that supports the current requirements. A-20 Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide 78-6511-08