Cisco WS-X4013 Hardware Maintenance Manual - Page 101
Chassis Front, Jumper the Boot ROM jumpers as shown in to permit writing to Flash memory.
UPC - 746320976914
View all Cisco WS-X4013 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Memory Replacement Procedures To upgrade the Cisco 4000-M Flash memory, replace the standard Flash memory configuration of 2 MB with 4 MB of Flash memory. The Cisco 4500-M and Cisco 4700 Flash memory upgrade requires replacing or adding to the standard Flash memory configuration of 4 MB with 8, 16, 32, or 64 MB of Flash memory. Figure 5-5 shows the SIMM locations in the Cisco 4000-M. Figure 5-5 Cisco 4000-M SIMM Locations Shared-memory SIMM socket Motherboard Main memory SIMM socket with proper SIMM orientation Chassis Front U3 J1 U44 J7 J8 Pin 1 J4 U114 J6 U110 Pin 1 J6 J6 write-enable jumper position FW1 FW2 J7 J8 Flash memory SIMM sockets H2403 Boot ROM jumpers (J7 and J8) Boot ROMs Note Jumper the Boot ROM jumpers as shown in Figure 5-5 to permit writing to Flash memory. Maintaining and Upgrading the Router 5-7