Cisco WS-X4013 Hardware Maintenance Manual - Page 41
as shown in then for optimum, performance
UPC - 746320976914
View all Cisco WS-X4013 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Network Connection Considerations Figure 2-19 shows the network connections of the four-port serial module adapter cables. Figure 2-19 Four-Port Serial Port Adapter Cables Router connections H2485 EIA/TIA-232 EIA/TIA-449 V.35 X.21 Network connections at the modem or CSU/DSU EIA-530 The dual serial ports are DB-50 connectors. (See Figure 2-20.) These serial ports can be configured as DTE or DCE, depending on the type of serial cable being used. Note If the dual serial port module is labeled with V2, as shown in Figure 2-20, then for optimum performance, use the version of the cable with the part number ending in -02: for example, 72-0740-02 (DCE) or 72-0671-02 (DTE). Preparing for Installation 2-19
Preparing for Installation
2-19
Network Connection Considerations
Figure 2-19 shows the network connections of the four-port serial module adapter cables.
Figure 2-19
Four-Port Serial Port Adapter Cables
The dual serial ports are DB-50 connectors. (See Figure 2-20.) These serial ports can be configured
as DTE or DCE, depending on the type of serial cable being used.
Note
If the dual serial port module is labeled with
V2
, as shown in Figure 2-20, then for optimum
performance, use the version of the cable with the part number ending in -02: for example,
72-0740-02 (DCE) or 72-0671-02 (DTE).
Router connections
EIA/TIA-449
V.35
X.21
Network connections at the modem or CSU/DSU
H2485
EIA/TIA-232
EIA-530