Cisco WS-X4013 Hardware Maintenance Manual - Page 129
to boot the Cisco Internetwork Operating System Cisco IOS, or, to boot
UPC - 746320976914
View all Cisco WS-X4013 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Entering the ROM Monitor Program • boot or b-Boot an image. The boot command with no arguments will boot the first image in boot flash. You can include an argument, filename, to specify a file to be booted over the network using the Trivial File Transfer Protocol (TFTP). The local device (see the description of b device following) can be specified by typing the device specifier (devid). If the specified device name is not recognized by the ROM monitor, the system will attempt to boot the image (imagename) from a network TFTP server. Do not insert a space between devid and imagename. Options to the boot command are -x, load image but do not execute, and -v, verbose. The form of the boot command follows: boot [-xv] [devid][imagename] b-Boots the default system software from ROM b filename [host]-Boots using a network TFTP server. When a host is specified, either by name or IP address, the boot command will boot from that source. b flash:-Boots the first file in Flash memory b device:-Boots the first file found in the Flash device. The Flash device specified can be either flash:, to boot the Cisco Internetwork Operating System (Cisco IOS), or bootflash:, to boot the boot image in Flash. b device:name-An extension of the above command, allows you to specify a particular filename in the flash bank. • reset or i-Resets and initializes the system, similar to power-on. • dev-Lists boot device identifications on the router. For example: rommon 10 > dev Devices in device table: id name flash: flash bootflash: boot flash eprom: eprom • dir-Lists the files on the named device, dir device, where the device is flash or bootflash; lists the available files on that device. For example: rommon 11 > dir flash: File size Checksum File name 2229799 bytes (0x220627) 0x469e C4500-k Cisco 4500-M and Cisco 4700 ROM Monitor D-3